FIRMWARE, DRIVER DAN TOOL REDMI NOTE 4 100%

The Xiaomi Redmi Note 4 is powered by 2GHz octa-core Qualcomm Snapdragon 625 processor and it comes with 4GB of RAM. The phone packs 64GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Xiaomi Redmi Note 4 packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The Xiaomi Redmi Note 4 runs Android 6.0 and is powered by a 4100mAh non removable battery. It measures 151.00 x 76.00 x 8.30 (height x width x thickness) and weigh 175.00 grams.

The Xiaomi Redmi Note 4 is a dual SIM (GSM and GSM) smartphone that accepts Micro-SIM and Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, USB OTG, FM, 3G and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include Compass Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.

FIRMWARE, DRIVER DAN TOOL REDMI NOTE 4

Flashtool
Firmware redmi note 4 Mi cloud
Driver Redmi note 4
Cust.img Redmi note 4

 TUTORIAL BYPASS MICLOUD REDMI NOTE 4

1. Download all the above files, then install the redmi note driver 4
2. Replace cust.img yag inside folder bypass redmi note 4 with cust.img that didwonload was
3. Open sp flashtool, then input the scater file yag is on bypass bypass redmi note 4
4. After that click download in flashtool
5. Then plug the usb while pressing the volume down, wait a while firmware will be detected
6. The process will run, wait until it finishes there will be green bermek notifs suskes.
7. After that turn on redmi note 4 pal
8. The boot process takes a while, usually 10 minutes to 15 minutes